Professional Epoxy Flooring in Toronto & the GTA

Yes. Properly installed epoxy creates a sealed, non-porous barrier that keeps salt, de-icing chemicals, and moisture from ever reaching the concrete underneath — which is exactly what causes flaking and spalling in Toronto winters. See how our epoxy coating system is built for this climate.

Bare concrete is what cracks under freeze-thaw stress, not properly cured epoxy. A flake or full-broadcast system adds a flexible, impact-resistant layer over the slab that helps absorb daily temperature swings. Our flake system page covers the durability specs in more detail.

We install epoxy in temperatures as low as 50°F (10°C), and our polyaspartic options cure reliably even in cooler conditions. If your garage runs colder than that in winter, we'll schedule around it — book a free consultation and we'll confirm the right install window for your space.

A sealed epoxy or polyaspartic system is the most salt-resistant option available for GTA homes — far more resistant than bare sealed concrete or paint-based coatings, which break down within a season or two. Homeowners in colder pockets of the region, like our Toronto customers, see the biggest difference in year-over-year floor condition.

Peeling and bubbling almost always trace back to skipped surface prep or moisture that wasn't addressed before coating, not the epoxy itself. That's why every installation is backed by our 10-year residential warranty, so it's covered if something was missed.

Hardware-store kits are typically thin 1-part acrylic or light 2-part epoxy — a fraction of the thickness of a professional system — so they wear through in months instead of years. Our epoxy coating system uses commercial-grade materials applied at proper mil thickness.

Most DIY kits aren't rated for daily tire traffic and start showing hot-tire marks, peeling, and delamination within a year. A professionally installed flake system is built specifically to handle daily vehicle use.

In most cases, yes — but the failed coating has to be fully ground off first rather than coated over, or the new epoxy will fail the same way. Our residential team handles this removal-and-recoat process regularly.

It's necessary, not optional — epoxy only bonds properly to a mechanically profiled, contaminant-free slab. Our concrete polishing and grinding process preps the surface properly before any new coating goes down.

DIY kits typically last 1-3 years before visible wear; a professionally installed system lasts 10-20 years with proper care. That's reflected in our warranty terms, which only apply to professional-grade installations.

Flake systems broadcast colored chips into the top coat for texture and slip resistance; metallic epoxy uses pigments that swirl into marbled, 3D-looking patterns; solid color is a clean, single-tone finish. Our metallic epoxy page has real project photos of the look.

Flake systems are the most forgiving for daily use — the multi-color texture hides tire marks, dust, and minor scuffs far better than a solid color. Check out our flake system options and colors.

Yes — that marbled effect is exactly what metallic epoxy is designed to produce, and no two floors turn out identical since the pigments move naturally during application. Browse the finishes on our metallic epoxy page.

It's mostly personal preference — gloss shows off color and depth best, while a satin or matte topcoat hides scuffs and dust better in a high-traffic rec room. We'll walk through both options during your residential consultation.

Regular sweeping and the occasional damp mop is really all a properly sealed epoxy floor needs — the seamless surface doesn't trap dirt in grout lines or pores the way tile or bare concrete does. Long-term care details are included in our warranty documentation.